cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
4,567 Views
Registered: ‎02-18-2008

AccelDSP errors when using Accel_probe

Hello, I keep getting an error when doing the verify fixed point step, I had placed the  accel_probe command in couple of places in the design function with the accel_rpobe_plot in the script, but I keep getting the following error.  It seems that it is not able to save the accel_prove_floating_data.  Any suggestions?

#Data sample buffer for accel_probe sampleIn reached maximum of 2048 samples. Additional data will not be plotted.Data sample buffer for accel_probe sampleOut Real reached maximum of 2048 samples. Additional data will not be plotted.Data sample buffer for accel_probe sampleOut Imag reached maximum of 2048 samples. Additional data will not be plotted. Error using ==> load

#Unable to read file ../accel_probe_floating_data: No such file or directory.

#

#Error in ==> accel_probe_plot at 54

# accel_probe_floating_data = load('../accel_probe_floating_data');

#

#Error in ==> fft_006_script at 111

#accel_probe_plot;

 

0 Kudos
0 Replies