cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
969 Views
Registered: ‎01-22-2015

Camera Link to SDI convertion

Jump to solution

Hello,

I must implement a Camera Link to SDI convertor in Artix7. Has somebody any idea what is the best way to do that?

 

Thanks for your help.

Regards,

Farzad

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
906 Views
Registered: ‎11-09-2015

Hi farzad.hosseini@ruag.com,

 

Yes xapp585 and xapp1097 are the one you should use for reference. But you are still required to do your own bridge between  the input and output. I do not think there is any example of this. You need to create your own logic


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
4 Replies
Highlighted
Moderator
Moderator
920 Views
Registered: ‎11-09-2015

Hi farzad.hosseini@ruag.com,

 

You need to create a bridge to convert the signals from Camera Link to SDI, then you can use the SDI IP.


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
912 Views
Registered: ‎01-22-2015

Dear Florent,

 thanks for your reply.

Yes, the issue is the bridge. I need more details.

Can I use the High Speed SelectIO Wizard or use XAPP585?

Are there any application notes, which could be helpful for beginners?

Regards,

Farzad

0 Kudos
Highlighted
Moderator
Moderator
907 Views
Registered: ‎11-09-2015

Hi farzad.hosseini@ruag.com,

 

Yes xapp585 and xapp1097 are the one you should use for reference. But you are still required to do your own bridge between  the input and output. I do not think there is any example of this. You need to create your own logic


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
Highlighted
Moderator
Moderator
839 Views
Registered: ‎11-09-2015

HI farzad.hosseini@ruag.com,

 

Do you have any updates on this?

 

If your question is answered or your issue is solved, please mark the response which helped as solution (click on the button "Accept as solution" below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Best Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos