cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
1,126 Views
Registered: ‎08-08-2018

HDMI FrameBufferExample Design 2018.1 for VU440 device

Jump to solution

Hello.

 

I am going to be prototyping with HAPS80( VU440) which will consist HDMI.  Our first bring up will be HDMI pass through.

I was reading up HDMI Frame Buffer Example which is perfect for what I want to bring up on HAPs.

What is required required to port this onto a HAPS or (VU440 device)?

 

Can you give a contact I can work with that will assist me in retargeting this design for VU440 device?

 

Thanks

David Tokhi

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,100 Views
Registered: ‎10-04-2017

Hi @dtokhi,

 

Take a look at this post on how to contact your FAE. They will be able to help you with the specific details of the port.

 

I am not sure which example design you are referencing, so I will speak to the example design outlined in PG236.

 

As a quick overview:

1. you will need to build the example design for the VDU118 as a reference, including the example application. 

2. Then you can port this hardware to the VU440, paying attention to your constraints.

3. Once your hardware is complete, you can follow the firmware flow and then use the application for the VCU118 example design.

 

Keep in mind that the VCU118 example design also requires an FMC daughter card.

 

2018-08-09 14_11_50-Xilinx Documentation Navigator 2017.2 -  http___www.xilinx.com_support_documenta.png

Regards,

Sam

 

 

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub

View solution in original post

3 Replies
Highlighted
Moderator
Moderator
1,101 Views
Registered: ‎10-04-2017

Hi @dtokhi,

 

Take a look at this post on how to contact your FAE. They will be able to help you with the specific details of the port.

 

I am not sure which example design you are referencing, so I will speak to the example design outlined in PG236.

 

As a quick overview:

1. you will need to build the example design for the VDU118 as a reference, including the example application. 

2. Then you can port this hardware to the VU440, paying attention to your constraints.

3. Once your hardware is complete, you can follow the firmware flow and then use the application for the VCU118 example design.

 

Keep in mind that the VCU118 example design also requires an FMC daughter card.

 

2018-08-09 14_11_50-Xilinx Documentation Navigator 2017.2 -  http___www.xilinx.com_support_documenta.png

Regards,

Sam

 

 

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub

View solution in original post

Highlighted
Moderator
Moderator
1,020 Views
Registered: ‎11-09-2015

Hi @dtokhi,

 

Do you have any update on this? Was the reply from @samk enough for you?

If your question is answered or your issue is solved, please mark the response which helped as solution (click on the button "Accept as solution" below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Best Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Visitor
Visitor
971 Views
Registered: ‎08-08-2018
Yes. Sam has been very helpful along the way.
0 Kudos