cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Explorer
Explorer
328 Views
Registered: ‎08-08-2012

MIPI CSI2 DEMO ZCU102

Jump to solution

Dear Sir, 

I am using ZCU102 and LI-IMX274MIPI-FMC V1-1 for testing the MIPI IP. I have already followed the steps in PG232 to generate the elf and bit file. I have downloaded the bit file by xsdb.

I have already generated the mipi example program. How can I download the mipi example program by xsdb or vivado command line ?

Regards,

Teddy.

Tags (2)
0 Kudos
Reply
1 Solution

Accepted Solutions
Explorer
Explorer
284 Views
Registered: ‎08-08-2012

Thanks.

I have solved the problem. I saw the VITIS has generated the BOOT.BIN in the mipi csi2 example. I have put it in the SD Card then ZCU102 can boot up the demo via the SD Card.

View solution in original post

2 Replies
Xilinx Employee
Xilinx Employee
285 Views
Registered: ‎03-30-2016

Hello @teddywhy 

After you generated bit/elf file successfully, 
Could you please follow steps mentioned in PG232 Chapter 5 "Running the Design on Hardware" ?

Runnig_HE.png

Thanks & regards
Leo

Explorer
Explorer
285 Views
Registered: ‎08-08-2012

Thanks.

I have solved the problem. I saw the VITIS has generated the BOOT.BIN in the mipi csi2 example. I have put it in the SD Card then ZCU102 can boot up the demo via the SD Card.

View solution in original post