cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ackye
Contributor
Contributor
264 Views
Registered: ‎05-19-2020

Open the SDK project of xapp1249 with VITIS, no source code can be imported

Open the SDK project of xapp1249 with VITIS, no source code can be imported

Vivado’s FPGA hardware project is imported without any problems, but when I use vitis to import the project, I can’t see any code

I also tried to import the resource directly to import the code (.c.h) but it cannot be compiled.

The import path is also set according to the PDF (<unzip_dir>\xapp1249\srcs\fidus_fmc_ctlr\SW)

 

微信图片_20200927150340.png微信图片_20200927150328.png

Tags (1)
0 Kudos
1 Reply
florentw
Moderator
Moderator
221 Views
Registered: ‎11-09-2015

Hi @ackye 

Did you try first with 2018.1? Note that the XAPP is officially supported only for the version it was created.

Vitis is a bit different than SDK. Even for SDK I would not recommend to import workspace directly between different versions.

You might want to create a new bare metal application running on the microblaze on your Hw_1 platform. The use the empty template and manually import the c files individually


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**