cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
779 Views
Registered: ‎05-03-2018

Switching Resolution on Display Port RX subsystem 2.1

Jump to solution

Dear all,

 

Does the IP support more than one resolutions?


I mean, in our application we need to support 3200x1200 at 120fps,
but we'd like to know if we can support for example 1600x1200 at 120fps without regenerating / reconfiguring the DiP IP core.

 

Best regards,

Andrea

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Mentor
Mentor
764 Views
Registered: ‎06-16-2013

Re: Switching Resolution on Display Port RX subsystem 2.1

Jump to solution

Hi @andreac_avnet

 

Can you use EDID for your application ?

If yes, I guess you can switch resolution on DP Rx IP.

However, even if DP Rx can support these resolutions, I suggest to consider pixel clock and SSC rate.

 

Best regards,

 

View solution in original post

1 Reply
Highlighted
Mentor
Mentor
765 Views
Registered: ‎06-16-2013

Re: Switching Resolution on Display Port RX subsystem 2.1

Jump to solution

Hi @andreac_avnet

 

Can you use EDID for your application ?

If yes, I guess you can switch resolution on DP Rx IP.

However, even if DP Rx can support these resolutions, I suggest to consider pixel clock and SSC rate.

 

Best regards,

 

View solution in original post