UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
199 Views
Registered: ‎06-05-2019

8T49N241 init failed in zcu104 csi rx project

I want to migrate the CSI-2 RX subsystem example design to my ZCU104 FPGA board and i found the reason that xmipi_example program didn't work might be the clock generator is 8T49N241 on zcu104 not the Si5324 on zcu102. So I modified the xmipi_example.c file. But the program displayed messages as follow

微信截图_20190910194625.png

the xmipi project can be found in the attachment

Tags (2)
2 Replies
Moderator
Moderator
157 Views
Registered: ‎11-09-2015

Re: 8T49N241 init failed in zcu104 csi rx project

Hi @ivanfan 

According to the following topic, it seems that you have solve your issue:

https://forums.xilinx.com/t5/Video/iic-send-data-failed-in-csi-rx-example/m-p/1019833#M27555

Could you kindly share your solution with the community as others might face the same?

Thanks,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
Highlighted
Xilinx Employee
Xilinx Employee
140 Views
Registered: ‎03-30-2016

Re: 8T49N241 init failed in zcu104 csi rx project

Hello @ivanfan 
Actually , I am not familiar with this IIC IP.

Are you sure that you are setting the correct ID ?
https://forums.xilinx.com/t5/Embedded-Development-Tools/I2C-xps-IIC-does-not-sending-data/td-p/47651

Hope this helps.

0 Kudos