UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor guyeli31
Visitor
691 Views
Registered: ‎05-16-2018

MIPI CSI-2 Rx on Vivado 2018.1

Jump to solution

I was trying to run the reference design for MIPI CSI-2 Rx on Vivado 2018.1. After picking MIPI CSI-2 Rx Subsystem in the IP Catalog and choosing open example design I got these synth 2 errors:

 

1. [synth 8-439] module 'design_1_v_gamma_lut_0_0_v__gamma_lut' not found

2. [synth 8-439] module 'design_1_v_demosaic_0_0_v_demosaic' not found

 

What did I do wrong? Is there any other way to run the reference design on Vivado 2018.1?

 

Thanks

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
875 Views
Registered: ‎11-09-2015

Re: MIPI CSI-2 Rx on Vivado 2018.1

Jump to solution

Hi @guyeli31,

 

2 possible root causes:

  • You are on windows and the path you are using is too long. Please try to use a really short path (use the root of your directory)
  • The gamma LUT should not require a license but we have an issue in 2018.1 where is is linked to the TPG (see AR#71086).  You might want to make sure you have the TPG license (can be generated for free).

 

You can investigate more by looking into the vivado_hls.log file generated in the output for the IP synthesis (in ip_name_synth_1 folder)

 

Hope that helps,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
2 Replies
Moderator
Moderator
876 Views
Registered: ‎11-09-2015

Re: MIPI CSI-2 Rx on Vivado 2018.1

Jump to solution

Hi @guyeli31,

 

2 possible root causes:

  • You are on windows and the path you are using is too long. Please try to use a really short path (use the root of your directory)
  • The gamma LUT should not require a license but we have an issue in 2018.1 where is is linked to the TPG (see AR#71086).  You might want to make sure you have the TPG license (can be generated for free).

 

You can investigate more by looking into the vivado_hls.log file generated in the output for the IP synthesis (in ip_name_synth_1 folder)

 

Hope that helps,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Moderator
Moderator
598 Views
Registered: ‎11-09-2015

Re: MIPI CSI-2 Rx on Vivado 2018.1

Jump to solution

Hi @guyeli31,

 

If your question is answered or your issue is solved, please kindly mark the response which helped as solution (click on "Accept as solution" buton below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos