UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
862 Views
Registered: ‎03-03-2017

VTPG [Synth 8-439] Module not found

Jump to solution

Hi, I am using VIvado 2018.1 implementing a design using a couple of V_TPGs in a block design for a xc7k325tffg676-1 device.   When I generate output products the VTPG fails synth every time even after moving the project to a very short path name folder.   Is there a known solution for this error?

tpg_error.png

Thanks.

Tim

0 Kudos
1 Solution

Accepted Solutions
Highlighted
922 Views
Registered: ‎03-03-2017

Re: VTPG [Synth 8-439] Module not found

Jump to solution

@florentw,

   Sorry, I resolved it.   I closed Vivado, relaunched Vivado and opened the project, reset output products and tried regenerating output products and this time it synthesized successfully.

   Strange, but resolved.


Thanks.

Tim

2 Replies
Moderator
Moderator
860 Views
Registered: ‎11-09-2015

Re: VTPG [Synth 8-439] Module not found

Jump to solution

HI @tim_severance,

 

Could you share you log file?

 

Could you check in the folder .runs/synth_1 if there is one folder for the failing VTPG? If yes could you share the vivado_hls.log file if any?


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
Highlighted
923 Views
Registered: ‎03-03-2017

Re: VTPG [Synth 8-439] Module not found

Jump to solution

@florentw,

   Sorry, I resolved it.   I closed Vivado, relaunched Vivado and opened the project, reset output products and tried regenerating output products and this time it synthesized successfully.

   Strange, but resolved.


Thanks.

Tim