cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
xil_tour
Explorer
Explorer
808 Views
Registered: ‎06-14-2018

Part 'xcu200' is not installed.

Jump to solution

Hi,

I'm on:

~$ lsb_release -a
Description:	Ubuntu 16.04.6 LTS

I have a working SDAccel 2018.2 installation. I can compile and run kcu1500 HW simulation.

I grabbed the 2018.2 Development Shell from https://www.xilinx.com/products/boards-and-kits/alveo/u200.html#2018_2

I extracted the .deb as I don't use a system-wide installation, and put the u200 folder in the platform folder:

$ ls /home/me/Xilinx/SDx/2018.2/platforms/
xilinx_aws-vu9p-f1_dynamic_5_0  xilinx_vcu1525_dynamic_5_1
xilinx_kcu1500_dynamic_5_0 xilinx_u200_xdma_201820_1

$ ls /home/me/Xilinx/SDx/2018.2/platforms/xilinx_u200_xdma_201820_1/
hw  license  sw  xilinx_u200_xdma_201820_1.xpfm

However, when I try to compile a project, I got:

ERROR: [XOCC 200-70] Part 'xcu200' is not installed.

Any idea welcome.

0 Kudos
1 Solution

Accepted Solutions
graces
Moderator
Moderator
743 Views
Registered: ‎07-16-2008

You need to upgrade to XDF edition or above. U200/U250 is not supported in 2018.2 regular release.

-----------------------------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

6 Replies
syedz
Moderator
Moderator
786 Views
Registered: ‎01-16-2013

@xil_tour 

 

Can you run the following command to see if you are able to see the device?

xocc --list

 

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_3/ug1279-sdx-command-utility-reference-guide.pdf#page=45

--Syed

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------
xil_tour
Explorer
Explorer
777 Views
Registered: ‎06-14-2018
$ xocc --list
xilinx_aws-vu9p-f1_dynamic_5_0
xilinx_kcu1500_dynamic_5_0
xilinx_u200_xdma_201820_1
xilinx_vcu1525_dynamic_5_1

plus some others.

0 Kudos
graces
Moderator
Moderator
758 Views
Registered: ‎07-16-2008

Are you running the regular 2018.2 release of SDAccel or 2018.2 XDF edition?

Please note 2018.2 XDF is dedicated to the development of applications for the Alveo cards (U200 and U250). 

-----------------------------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs.
-----------------------------------------------------------------------------------------------------------------------
xil_tour
Explorer
Explorer
749 Views
Registered: ‎06-14-2018

I'm on:

Xilinx SDx v2018.2 (64-bit)

Can I use it or am I forced to use the XDF version ?

0 Kudos
graces
Moderator
Moderator
744 Views
Registered: ‎07-16-2008

You need to upgrade to XDF edition or above. U200/U250 is not supported in 2018.2 regular release.

-----------------------------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

xil_tour
Explorer
Explorer
741 Views
Registered: ‎06-14-2018

Ok, thanks for your time.

0 Kudos