cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
840 Views
Registered: ‎06-25-2016

SDAccel VC707 supporting

Jump to solution

Good Day!

Does SDAccel supports VC707 or KC707 boards? If yes what version do I need? If not what can I perform to make boards work under SDAccel software?

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
766 Views
Registered: ‎11-04-2010

Re: SDAccel VC707 supporting

Jump to solution

There was a checkbox for 7 series in form during installation of SDx IDE. That doesn't mean anything for SDAccel support?

That doesn't mean SDAccel support VC707 and it only mean the integrated Vivado will support 7 series device.

 

Is there any chance to modify Ultrasale examples' source code for SDAccel to run it on Virtex7?

In 2018.2, You need to have your customized platform first, but the flow is complicated and not supported in the forum now.

I suggest you use the supported platform directly as @yashp mentioned.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
4 Replies
Highlighted
Moderator
Moderator
821 Views
Registered: ‎01-16-2013

Re: SDAccel VC707 supporting

Jump to solution
Hi,

SDAccel supported hardware are listed on page number 31 of UG1238.
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_2/ug1238-sdx-rnil.pdf

VC707 and KC707 is not supported under SDAccel.

Thanks,
Yash
0 Kudos
Highlighted
Adventurer
Adventurer
803 Views
Registered: ‎06-25-2016

Re: SDAccel VC707 supporting

Jump to solution

There was a checkbox for 7 series in form during installation of SDx IDE. That doesn't mean anything for SDAccel support?

0 Kudos
Highlighted
Adventurer
Adventurer
802 Views
Registered: ‎06-25-2016

Re: SDAccel VC707 supporting

Jump to solution
Is there any chance to modify Ultrasale examples' source code for SDAccel to run it on Virtex7?
0 Kudos
Highlighted
Moderator
Moderator
767 Views
Registered: ‎11-04-2010

Re: SDAccel VC707 supporting

Jump to solution

There was a checkbox for 7 series in form during installation of SDx IDE. That doesn't mean anything for SDAccel support?

That doesn't mean SDAccel support VC707 and it only mean the integrated Vivado will support 7 series device.

 

Is there any chance to modify Ultrasale examples' source code for SDAccel to run it on Virtex7?

In 2018.2, You need to have your customized platform first, but the flow is complicated and not supported in the forum now.

I suggest you use the supported platform directly as @yashp mentioned.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos