cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Ric_D
Visitor
Visitor
740 Views
Registered: ‎03-09-2021

Vitis 2020.2 XRT installation file

Jump to solution

Hello together,

I am trying to start a simple project for Vitis 2020.2 since a few days now. But in all tutorials, I run over the required XRT installation, which should be found for a ZCU102 via this link https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-platforms/2020-2.html

However, I only find here the base files and the common images. Don't I need to install XRT for the ZCU102 with Vitis 2020.2?

But why does an XRT installation file exist for alveo boards? Also, where are my sysroots paths etc in this case?

I am running on Ubuntu 20.04, so Vitis 2020.1 or older are not really an option for me.

I would be really glad about any explanation or possible solutions.

Thank you very much!

Best regards,

Ric

0 Kudos
1 Solution

Accepted Solutions
yangc
Xilinx Employee
Xilinx Employee
685 Views
Registered: ‎02-27-2019

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/ug1393-vitis-application-acceleration.pdf   page17

Installing XRT is not required when targeting Arm®-based embedded platforms:Vitis compilerh as its own copy of xclbinutil for hardware generation, and for software compilation, you can use the XRT from the sysroot. Look for Common images for Embedded Vitisplatforms on the downloads page.

https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-platforms.html

unzip zynqmp image and run the tcl file.

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

1 Reply
yangc
Xilinx Employee
Xilinx Employee
686 Views
Registered: ‎02-27-2019

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/ug1393-vitis-application-acceleration.pdf   page17

Installing XRT is not required when targeting Arm®-based embedded platforms:Vitis compilerh as its own copy of xclbinutil for hardware generation, and for software compilation, you can use the XRT from the sysroot. Look for Common images for Embedded Vitisplatforms on the downloads page.

https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-platforms.html

unzip zynqmp image and run the tcl file.

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post