cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
942 Views
Registered: ‎05-02-2011

dsa file open fail

Jump to solution

I find the warning information :

WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_rx/m_axis_video_aresetn_out(undef) and /v_vid_in_axi4s/aresetn(rst)
WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_tx/s_axis_video_aresetn_out(undef) and /v_axi4s_vid_out/aresetn(rst)

When I use the vivado in tcl console:

 

open_dsa zcu102_rv_ss.dsa  in revision file

in ZCU104, VCU+ZCU106, ZCU102 MPSOC get the same error

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/Docs/software-tools-system-requirements.md

 

My system: Win 10

SDx vision: Vivado 2018.2

 

 

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
822 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter

Yes, you can ignore the warnings.

We have tested multiple examples with this platform.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post

0 Kudos
9 Replies
Highlighted
Moderator
Moderator
929 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

hi @mimitter

what is the reVISION platform version?

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Highlighted
Contributor
Contributor
901 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

hi :

I use the SDx 2018.2, And Download the 60 days SDx license in Xilinx web.

To rebuild the Vivado Project, I find the warning information when I write open_dsa command in tcl console.

WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_rx/m_axis_video_aresetn_out(undef) and /v_vid_in_axi4s/aresetn(rst)
WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_tx/s_axis_video_aresetn_out(undef) and /v_axi4s_vid_out/aresetn(rst)

 

After vivado Succesfully read DSA: zcu102_rv_ss.dsa , I find that the connectors are full connected in the Block Design

 

 

error.PNG
0 Kudos
Highlighted
Contributor
Contributor
896 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

this is vivado  information

0 Kudos
Highlighted
Moderator
Moderator
886 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter,

I assume you have downloaded the reVISION platform from here,

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/Docs/software-tools-system-requirements.md

Currently the platform available at above location is 2018.3, please check which one you have.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Highlighted
Contributor
Contributor
872 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

@nutang

thank your reply

I download the revision 2018.3 , and run this dsa in SDx 2018.3 in Unbuntu OS, see the same warning information.

And more warning information after key-in the Validate Design . 

Could you rebuild the revision example in your environment. 

I will re-try  in other PC environment. 

Thank you 

 

error1.PNG
error2.PNG
error3.PNG
error4.PNG
0 Kudos
Highlighted
Moderator
Moderator
861 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

hi @mimitter

Thank you very much for detailed information.

I will check this and update you.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Highlighted
Moderator
Moderator
832 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter

I observed the warning in my machine too.

 

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Highlighted
Contributor
Contributor
824 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

hi @nutang:

 

Thank you, your help!! 

So warnings are correct in revision project,influencing  the project implement ??

 

And I find that interrupts are not full connected in project.

Could  I ignore these warnings ??

 

 

interrupt.PNG
0 Kudos
Highlighted
Moderator
Moderator
823 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter

Yes, you can ignore the warnings.

We have tested multiple examples with this platform.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post

0 Kudos