UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer agary
Observer
614 Views
Registered: ‎05-17-2018

Realtime filter between HDMI-in and HDMI-out using SDSoC

Jump to solution

Hello everyone,

 

I have a ZCU104 board (Zynq Us+). Now I want to create a flow between HDMI in and HDMI out and put a simple filter (filter's type is not important at all) in the middle of this flow. I think SDSoC could help me do this but I cannot find any good tutorial. Would someone help me, please?

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
562 Views
Registered: ‎08-20-2018

Re: Realtime filter between HDMI-in and HDMI-out using SDSoC

Jump to solution

Hi @agary

 

Please refer reVISION getting started guide

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/README.md

 

Overview 

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/overview.md

 

tool flow tutorial

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/tool-flow-tutorials.md

 

Best Regards,

Nutan

---------------------------------------------------------

Please don't forget to reply, kudo and accept as a solution!!

 

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post

1 Reply
Moderator
Moderator
563 Views
Registered: ‎08-20-2018

Re: Realtime filter between HDMI-in and HDMI-out using SDSoC

Jump to solution

Hi @agary

 

Please refer reVISION getting started guide

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/README.md

 

Overview 

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/overview.md

 

tool flow tutorial

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/tool-flow-tutorials.md

 

Best Regards,

Nutan

---------------------------------------------------------

Please don't forget to reply, kudo and accept as a solution!!

 

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post