cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
937 Views
Registered: ‎08-04-2018

About setup debug information

Jump to solution

I am, trying to understand what this does? How am I suppose to use this?

 

INPUT PIPE STAGE

 xilinx.PNG

 

 

Thanks in advance.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
981 Views
Registered: ‎11-04-2010

Hi, @benaka , 

You can refer to UG908:

Enables extra levels of pipe stages (for example, flip-flop registers) on the PROBE inputs of the ILA core.

This feature can be used to improve timing performance of your design by allowing the Vivado tools to place the ILA core away from critical sections of the design.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

2 Replies
Highlighted
Moderator
Moderator
982 Views
Registered: ‎11-04-2010

Hi, @benaka , 

You can refer to UG908:

Enables extra levels of pipe stages (for example, flip-flop registers) on the PROBE inputs of the ILA core.

This feature can be used to improve timing performance of your design by allowing the Vivado tools to place the ILA core away from critical sections of the design.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

Highlighted
Adventurer
Adventurer
920 Views
Registered: ‎08-04-2018

OK, thank you. :)

0 Kudos