cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
manh_et2
Adventurer
Adventurer
4,749 Views
Registered: ‎10-29-2007

ChipScope Analyzer: ILA signals not listed.

Hi everyone,

I've a ChipScope project which works on my laptop, however, on another PC, all the desired signals couldn't be listed.

I've tested 2 versions 9.2 and 10.1, none of them works. Even the re-installation can't fix it.

 

Thank  you for any help.

0 Kudos
2 Replies
ywu
Xilinx Employee
Xilinx Employee
4,736 Views
Registered: ‎11-28-2007

All you need to do is to save the project on your laptop and then copy the project file (.cpj file) to the other PC. You then open the project from Chipscope Analyzer running on the PC.

 

Cheers,

Jim

 

Cheers,
Jim
0 Kudos
manh_et2
Adventurer
Adventurer
4,722 Views
Registered: ‎10-29-2007

Thanks for your suggestion,

but I don't want each time to start a new project in my laptop and tranfer it to PC.

I prefer to solve the problem in the PC, like that I can let it synthesize for long time and do everything else in my laptop.

To me, tt seems the problem of USB Cable, since I've installed with the same disk Xilinx.

0 Kudos