UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
233 Views
Registered: ‎08-07-2019

How to configure more than 64 probes in VIO and ILA

Dear Sir/Ma'am,

In my design, I have 80 input ports out of which 70 input ports have width as 32-bits and remaining 10 i/p ports have width as 1-bit and also, I have 80 output ports out of which 70 have width as 32-bit and 10 has width as 1-bit.

Now, I need to configure all these input and output ports to VIO and ILA. But, VIO and ILA allows for configuration upto only 64-bits. 

So, what is the procedure to configure it?

I have tried the following for ILA but couldn't achieve what I wanted.

set_property -dict [list CONFIG.C_NUM_OF_PROBES {1} CONFIG.C_PROBE0_WIDTH {1}] [get_ips ila_0]

0 Kudos
2 Replies
Moderator
Moderator
91 Views
Registered: ‎02-09-2017

Re: How to configure more than 64 probes in VIO and ILA

Hi h20181230210@hyderabad.bits-pilani.ac.in ,

 

You're command is about right, but you need to specify the number of probes you want. For example, For the VIO:

 set_property -dict [list CONFIG.C_NUM_PROBE_IN {250}] [get_ips vio_0]

Where 250 is the number of Input probes I want for my VIO.

IF you wanted Output probes, just change the "IN" in the above command for "OUT". 

This same command is also valid for the ILA. In the "get_ips" command, change "vio_0" to "ila_0" (or to the correct name of your ILA).

Thanks,

Andre Guerrero

Product Applications Engineer

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
71 Views
Registered: ‎08-07-2019

Re: How to configure more than 64 probes in VIO and ILA

Using the command as you said, I can configure the number of i/o probes for vio and ila. But how can be configure the width of the 256 i/o probes provided 100 probes have different width and rest 156 probes have different width?

0 Kudos