cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer
Observer
296 Views
Registered: ‎05-10-2018

ILA triggered but on waveform uploaded

Hi xilinx employees,

I am debugging my circuits with the ILA tool, I have set the trigger condition, when I insert a reset to my board, the ILA become Post-triggerred from the waiting for trigger, but there is no waveform uploaded.

it drives me crazy......

 

0 Kudos
1 Reply
Highlighted
Moderator
Moderator
272 Views
Registered: ‎02-09-2017

Re: ILA triggered but on waveform uploaded

Hi @junnit ,

 

So we can narrow down the problem, could you please inform the follow itens:

  • What is the Vivado version that you are using? Is this issue specific for that Vivado installation or does it also happen with newer/older versions?
  • What is the OS that you are using? If Linux, what distro?
  • Could you try to reduce the JTAG clock speed (when you connect to the board) and try again? It needs to be at least 2.5x slower than the ILA clock.
  • Does this issue happens pnly with a specific design or you see the issue in any design with an ILA?

Thanks,

Andre Guerrero

Product Applications Engineer

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos