cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
217 Views
Registered: ‎02-13-2020

ILA waveform window disabled

Jump to solution

Vivado v2014.4 (64-bit)

I have two ILAs in design. Hardware manager is connected to the board.

Error Message: There is no current wave configuration. You must first trigger and open a waveform before adding probes.

The open waveform for this ILA core button is also disabled as shown in attached image.

WCFG file is not created in the folder location <project_folder>/<project_name>.hw->hw_1->wave

Capture.PNG

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
145 Views
Registered: ‎02-09-2017

Re: ILA waveform window disabled

Jump to solution

Hi @spencer_123,

It looks like the Waveform canvas has been deleted for some reason.

Could you please try to click on the "Trigger Immediate" button to see if that forces the ILA to collect some data and display it?

If that doesn't help, you can also try to delete all the contents in the <project_name>.hw directory, close the Vivado project and open it again, and reprogram the board. That should force Vivado to recreate all the ILA config files.

Thanks,

Andre Guerrero

Product Applications Engineer

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
2 Replies
Moderator
Moderator
146 Views
Registered: ‎02-09-2017

Re: ILA waveform window disabled

Jump to solution

Hi @spencer_123,

It looks like the Waveform canvas has been deleted for some reason.

Could you please try to click on the "Trigger Immediate" button to see if that forces the ILA to collect some data and display it?

If that doesn't help, you can also try to delete all the contents in the <project_name>.hw directory, close the Vivado project and open it again, and reprogram the board. That should force Vivado to recreate all the ILA config files.

Thanks,

Andre Guerrero

Product Applications Engineer

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
Highlighted
Visitor
Visitor
118 Views
Registered: ‎02-13-2020

Re: ILA waveform window disabled

Jump to solution

It works. 

Thanks!