cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
william.werner
Visitor
Visitor
1,321 Views
Registered: ‎11-26-2018

Xilinx SEU Estimator

Jump to solution

I downloaded the Xilinx SEU Estimator (Excel) in order to generate an estimate for XCZU15EG-2FFVB1156I (Zynq UltraScale+ MPSoC). In the "Overview" they list this type, but in the tool under "Family" I don't see this one listed in the pull-down. I also looked through each one listed in "Family" and still did not see this part type listed. Is the Zynq UltraScale+ MPSoC covered in this tool? If so please let me know how I can select that type.

thank you

Bill Werner

 

0 Kudos
1 Solution

Accepted Solutions
william.werner
Visitor
Visitor
1,283 Views
Registered: ‎11-26-2018

Thank you for your quick response, I have used the link and accepted the terms and conditions.....received a response from that page that I will hear back on the approval to use the tool within 2 days.

thank you

Bill

View solution in original post

0 Kudos
4 Replies
hj
Moderator
Moderator
1,318 Views
Registered: ‎06-05-2013

I can see them under Zynq Ultrascale+ devices. Here is the snapshot. 

Thanks

ddsd.JPG

-------------------------------------------------------------------------------------
For more information please refer to configuration resources https://forums.xilinx.com/t5/FPGA-Configuration/Configuration-Resources/m-p/753763/highlight/true#M5891
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
william.werner
Visitor
Visitor
1,305 Views
Registered: ‎11-26-2018

You have a newer version than the one I downloaded this afternoon from the Xilinx Website....the one I just downloaded is 2016.1 and I see you are using 2017.3.  Can you provide a link to the version you are using?

thanks much

Bill

0 Kudos
hj
Moderator
Moderator
1,302 Views
Registered: ‎06-05-2013
Hi Bill,
Here is the link https://www.xilinx.com/member/seu/xilinx-single-event-upset-estimator-license-agreement.html

Thanks
-------------------------------------------------------------------------------------
For more information please refer to configuration resources https://forums.xilinx.com/t5/FPGA-Configuration/Configuration-Resources/m-p/753763/highlight/true#M5891
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
william.werner
Visitor
Visitor
1,284 Views
Registered: ‎11-26-2018

Thank you for your quick response, I have used the link and accepted the terms and conditions.....received a response from that page that I will hear back on the approval to use the tool within 2 days.

thank you

Bill

View solution in original post

0 Kudos