UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
207 Views
Registered: ‎08-13-2019

understanding the commands

Jump to solution

create_debug_core u_ila_3 ila
set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_3]
set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_3]
set_property C_ADV_TRIGGER false [get_debug_cores u_ila_3]
set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_3]
set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_3]
set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_3]
set_property C_TRIGIN_EN false [get_debug_cores u_ila_3]
set_property C_TRIGOUT_EN false [get_debug_cores u_ila_3]
set_property port_width 1 [get_debug_ports u_ila_3/clk]
connect_debug_port u_ila_3/clk [get_nets [list {u_ila_3_rxusrclk_in[0]}]]
set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_3/probe0]
set_property port_width 1 [get_debug_ports u_ila_3/probe0]
connect_debug_port u_ila_3/probe0 [get_nets [list uhdsdi_demo/sdi_4ch_rxtx/link_status_out_4_3]]

 

 

what are these commands used for ?

Regards.

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
173 Views
Registered: ‎08-08-2017

Re: understanding the commands

Jump to solution

Hi @veekshitha 

These  constraints are equivalent for ILA IP configurations.

Example set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_3]  is equivalent command for  Sample data depth in the IP.

These constarints are useful to change the IP configuration affter post synthesis/post implementation so that you dont need to reconfigure the IP

Capture.PNG

-------------------------------------------------------------------------------------------------------------------------------
Reply if you have any queries, give kudos and accept as solution
-------------------------------------------------------------------------------------------------------------------------------
0 Kudos
1 Reply
Moderator
Moderator
174 Views
Registered: ‎08-08-2017

Re: understanding the commands

Jump to solution

Hi @veekshitha 

These  constraints are equivalent for ILA IP configurations.

Example set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_3]  is equivalent command for  Sample data depth in the IP.

These constarints are useful to change the IP configuration affter post synthesis/post implementation so that you dont need to reconfigure the IP

Capture.PNG

-------------------------------------------------------------------------------------------------------------------------------
Reply if you have any queries, give kudos and accept as solution
-------------------------------------------------------------------------------------------------------------------------------
0 Kudos