取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
Highlighted
Contributor
Contributor
157 次查看
注册日期: ‎01-19-2020

如何添加chipscope的信号到窗口?

使用chipscope发现没有波形图。但是在脚本里能看到,这些信号都是有链接到debug上的。请问从哪里可以把要观测的信号加入窗口?

无标题.jpg

0 项奖励
2 回复数
Highlighted
Xilinx Employee
Xilinx Employee
135 次查看
注册日期: ‎02-28-2019

试一下右下窗口添加“+”信号。

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 项奖励
Xilinx Employee
Xilinx Employee
54 次查看
注册日期: ‎05-15-2008

Not able to see the screenshot clearly.

Can you post the messages in the tcl console?

Looks like you write the waveform data into a file and it suggests you use read_hw_ila_data to show the waveform.

-vivian

-------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------------------------------
如果提供的信息能解决您的问题,请标记为“接受为解决方案”。
如果您认为帖子有帮助,请点击“奖励”。谢谢!
-------------------------------------------------------------------------------------------------
0 项奖励