UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor astary_kk
Visitor
1,827 Views
Registered: ‎07-12-2017

Zynq on a custom board cannot read BOOT.bin file in SD card

Hi,

 

I am working with a custom board with a Zynq7100. When I tried to start a helloworld project from SD card, the information returned from the uart is the following:

 

Xilinx First Stage Boot Loader 
Release 2017.1  Jul 12 2017-20:45:14
Devcfg driver initialized 
Silicon Version 3.1
Boot mode is SD
SD: rc= 0

I have already read the other problems on the forum, but what is different in my work is : there is no error message output like "SD init failed" or others. The boot procedure stuck in the "f_open" function and no longer proceed. I have tried the method like modifying the frequency of SD card in vivado or in SDK code, but none of them worked.

Tags (3)
0 Kudos