We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Got SDR? Free Webinar: Use MATLAB and Simulink to design digital radios with Analog Devices’ Zynq-based RF SOM. December 13

by Xilinx Employee on ‎12-04-2017 03:38 PM (27,512 Views)


Designing SDRs (software-defined radios)? MathWorks and Analog Devices have joined together to bring you a free Webinar titled “Radio Deployment on SoC Platforms.” It a 45-minute class that discusses hardware and software development for SDR designs using MathWorks’ MATLAB, Simulink, and HDL Coder to:


  • Model and simulate radio designs
  • Verify algorithms in simulation with streaming RF data
  • Deploy radio designs on hardware with HDL and C-code generation


The target hardware here is Analog Devices’ ADRV9361 RF SOM, which is based on ADI’s AD9361 RF Agile Transceiver and Xilinx’s Zynq Z-7035 All-Programmable SoC. ADI’s RF SOM has 2x2 MIMO capability.





Analog Devices’ Zynq-based RF SOM on a Carrier Card




There will be three broadcasts of the Webinar on December 13 to accommodate viewers around the world. Register here. Register even if you cannot attend and you’ll receive a link to a recording of the session.