We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Ready to start programming and configuring that Red Pitaya open instrument platform? Here’s a new blog series to help.

by Xilinx Employee ‎02-06-2017 02:31 PM - edited ‎02-06-2017 02:32 PM (39,430 Views)


The Zynq-based Red Pitaya open instrumentation board gives you a programmable platform like an Arduino or a Raspberry Pi, but with the added kick of high-speed ADCs and DACs for analog instrumentation projects. The Red Pitaya organization always intended the Red Pitaya board to be learning tool, and Anton Potočnik at ETH Zürich has started writing a blog series to help you learn how to program the board. So far, he’s published four projects:




Red Pitaya Frequency Counter Block Diagram.jpg



Red Pitaya Frequency Counter Block Diagram



The latest blog post is nearly a month old, so let’s hope there’s another soon.


For previous Xcell Daily blog posts about the Red Pitaya, see: