We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Adam Taylor’s MicroZed Chronicles—Supplemental: Getting the ZynqBerry and Raspberry Pi Camera Up and Running

by Xilinx Employee on ‎10-20-2016 10:00 AM (38,844 Views)


Adam Taylor, the prolific author of the long-running MicroZed Chronicles series, has just made a 4-minute video showing how he got the Raspberry Pi Camera running with the Trenz Electronic ZynqBerry dev board based on the Xilinx Zynq Z-7000 SoC. After just four minutes, he’s got HD video from the camera running through the ZynqBerry board and onto a video monitor. Take a look:





For more info on the ZynqBerry board, see:












About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.