cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ogutzwiller
Visitor
Visitor
7,071 Views
Registered: ‎04-28-2014

I2C adress for fmc conenctors on vc707

Jump to solution

I am developing a vhdl program to control equipment connected on the FMC connectors of VC 707 board.

The bus switch I2C address (0x74) should be addressed and configured to select the desired downstream device.

What is the I2C adress to send data to the FMC1 connector ? The table in the vc707 user guide gives 0bXXXXX00 (?).

Best Regards, Olivier

0 Kudos
1 Solution

Accepted Solutions
smarell
Community Manager
Community Manager
12,177 Views
Registered: ‎07-23-2012
Hi Oliver,

You have pointed it out correctly.

The I2C address to send data to FMC1 is given in table 1-24 of http://www.xilinx.com/support/documentation/boards_and_kits/vc707/ug885_VC707_Eval_Bd.pdf.

That is 0bXXXXX00 and the I2c switch position should be 1.

Regards,
Krishna
-----------------------------------------------------------------------------------------------
Please mark the post as "Accept as solution" if the information provided answers your query/resolves your issue.

Give Kudos to a post which you think is helpful.

View solution in original post

2 Replies
smarell
Community Manager
Community Manager
12,178 Views
Registered: ‎07-23-2012
Hi Oliver,

You have pointed it out correctly.

The I2C address to send data to FMC1 is given in table 1-24 of http://www.xilinx.com/support/documentation/boards_and_kits/vc707/ug885_VC707_Eval_Bd.pdf.

That is 0bXXXXX00 and the I2c switch position should be 1.

Regards,
Krishna
-----------------------------------------------------------------------------------------------
Please mark the post as "Accept as solution" if the information provided answers your query/resolves your issue.

Give Kudos to a post which you think is helpful.

View solution in original post

umamahe
Xilinx Employee
Xilinx Employee
7,060 Views
Registered: ‎08-01-2012

The following document http://www.xilinx.com/support/documentation/boards_and_kits/ug753_FMC_Broadcast.pdf also helps you 

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

0 Kudos