I have a ml510 board with the ML510 Board PLB_Error led lit up. Even at power up of the board. How ever many Selftests
have passed the board. I am trying to get LWIP ethernet to work on my board and wireshark never sees packets coming from
the ml510. Any ideas why the LED is lit up?
According to Answer Record.
ML510 Board - The PLB_Err led is on; Is this an issue with the board? FeedbackPrintAR# 32041
This says that the led pin is not driven therefore the LED will be shining red.
I got sys ace config 1 test to run successfully when I changed the jumper settings.
Now looking for the reason sys ace config 3 test will not run.