UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer ghhhi
Observer
549 Views
Registered: ‎04-06-2018

Programming NI sbRIO with Vivado

Hi there,

 

we have National Instruments sbRIO-9637 Board here, programmed with LabView.

Now I like to migrate our LabView projects and do future designs with Vivado and VHDL. 

Is there any boardfile I could use for the Board in Vivado? I know its the Xc7z020clg484ACX1425 chip.

Eventually I want to get an Evaluation Board but it would be nice to test some things out with the hardware we already have.

0 Kudos
2 Replies
Moderator
Moderator
489 Views
Registered: ‎04-12-2017

Re: Programming NI sbRIO with Vivado

Hello @ghhhi,

 

Does this board have JTAG interface ?

If yes, you can connect it to VIVADO using hardware manager.

 

You can start with the simple board.

Thank you.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Observer ghhhi
Observer
455 Views
Registered: ‎04-06-2018

Re: Programming NI sbRIO with Vivado

No. I also searched for JTAG in the available User Guides but without results.

Normally this board gets programmed through the ethernet interface directly out of LabVIEW.

Any other ideas?

0 Kudos