cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer
Observer
4,211 Views
Registered: ‎11-23-2010

Using Chipscope Pro 10 with XtremeDSP Kit 4 ...

Jump to solution

Hi,

 

I wanted to know if I can use Chipscope Pro 10 with Xilinx XtremeDSP Kit 4, which is a PCI interface based FPGA kit. I know Chipscope Pro is a JTAG device based tool, but is it possible to use it for debugging using PCI interface or will I need to connect the JTAG cable to my PCI card if I want to use Chipscope? 

 

Basically, if I want to use Chipscope Pro 10 with an XtremeDSP PCI interface card, will it work or no? Has anyone tried it before ... ?

 

Please do let me know ...

 

Thanks,

Z.

 

PS - I say Chipscorpe Pro 10 as I am using ISE 10.1 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
5,279 Views
Registered: ‎01-03-2008

Re: Using Chipscope Pro 10 with XtremeDSP Kit 4 ...

Jump to solution

PCI and JTAG are two different functions.  There will be no interaction issues.

------Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com

View solution in original post

0 Kudos
3 Replies
Highlighted
Xilinx Employee
Xilinx Employee
4,208 Views
Registered: ‎01-03-2008

Re: Using Chipscope Pro 10 with XtremeDSP Kit 4 ...

Jump to solution

ChipScope requires using a JTAG cable.

------Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com
0 Kudos
Highlighted
Explorer
Explorer
4,200 Views
Registered: ‎08-23-2011

Re: Using Chipscope Pro 10 with XtremeDSP Kit 4 ...

Jump to solution

Thanks for your reply. 

 

I know chipscope needs JTAG. I was wondering if I used both PCI and JTAG on the same board, will it be fine? 

 

Since I need to debug the XtremeDSP kit, it needs to be connected via the PCI. So if I also connect the JTAG to it for chipscope, will that be fine or will that cause some conflict or result in the board burn up or something? Can JTAG and PCI be used like that together? 

 

Do let me know ...

 

Thanks 

Z.

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
5,280 Views
Registered: ‎01-03-2008

Re: Using Chipscope Pro 10 with XtremeDSP Kit 4 ...

Jump to solution

PCI and JTAG are two different functions.  There will be no interaction issues.

------Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com

View solution in original post

0 Kudos