cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ronnie2
Visitor
Visitor
3,578 Views
Registered: ‎08-07-2017

Xilinx DLC-9LP usb programmer

Jump to solution

Hi. I have DLC-9LPMC Programmer and I'm going to buy ZYNQ7020 Z-Turn board. Can I use this Xilinx programmer with Z-Turn board?

0 Kudos
1 Solution

Accepted Solutions
hpoetzl
Voyager
Voyager
5,296 Views
Registered: ‎06-24-2013

Hey @ronnie2

 

If I'm not mistaken, the DLC9LP features the 14pin 2mm pitch JTAG connector while the MYiR Z-turn board has a 14pin 2.54mm pitch JTAG connector.

 

The DLC9LP seems to be still supported by recent Vivado.

 

So all you probably need is an adapter from 2mm to 2.54mm (which might have come with the DLC9LP).

 

Hope that helps,

Herbert

-------------- Yes, I do this for fun!

View solution in original post

5 Replies
hpoetzl
Voyager
Voyager
5,297 Views
Registered: ‎06-24-2013

Hey @ronnie2

 

If I'm not mistaken, the DLC9LP features the 14pin 2mm pitch JTAG connector while the MYiR Z-turn board has a 14pin 2.54mm pitch JTAG connector.

 

The DLC9LP seems to be still supported by recent Vivado.

 

So all you probably need is an adapter from 2mm to 2.54mm (which might have come with the DLC9LP).

 

Hope that helps,

Herbert

-------------- Yes, I do this for fun!

View solution in original post

ronnie2
Visitor
Visitor
3,565 Views
Registered: ‎08-07-2017

Thanks for your reply. Big help

0 Kudos
hpoetzl
Voyager
Voyager
3,560 Views
Registered: ‎06-24-2013
You're welcome!
-------------- Yes, I do this for fun!
0 Kudos
austin
Scholar
Scholar
3,557 Views
Registered: ‎02-27-2008

Did you ask:

 

http://www.myirtech.com/list.asp?id=502

Austin Lesea
Principal Engineer
Xilinx San Jose
ronnie2
Visitor
Visitor
3,505 Views
Registered: ‎08-07-2017

I want to buy the board from an Iranian distributor, but  I'll ask. Thanks.

0 Kudos