cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
6,988 Views
Registered: ‎04-09-2015

ZC706 - Power Management - set VADJ through TI Fusion permanent?

Jump to solution

Hello everyone,

 

I am currently trying to get the VADJ to 1.8V for an ZC706 Eval Board (Standard is 2.5V).

Now I found out, that you can reprogram the UCD90120A through the PMBus-Interface. This happens either via sending PMBus-Commands yourself PL/PS-wise or using the Texas Instruments Fusion Digital Power graphical user interface.

 

Three quesions:

1) Once I programmed the UCD90120A either way, do the settings stay after power off and on?

2) I read somewhere that you can get the USB-to-GPIO Cable from TI for free when you have an Eval Board. Is that still true?

3) If so, where can I get it for free? On the TI page there is only the 75$ product available.

 

Thanks in advance.

 

Steffen

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
13,007 Views
Registered: ‎08-01-2012

Re: ZC706 - Power Management - set VADJ through TI Fusion permanent?

Jump to solution

Q1) Once I programmed the UCD90120A either way, do the settings stay after power off and on?

Yes

 

 

Q2) I read somewhere that you can get the USB-to-GPIO Cable from TI for free when you have an Eval Board. Is that still true?

Q3) If so, where can I get it for free? On the TI page there is only the 75$ product available.

 

The following Answer http://www.xilinx.com/support/answers/54022.html give details

 

You can specify evaluation board voucher number. I guess there is discount in price

 

Also the below AR's are having useful information:-

 

http://www.xilinx.com/support/answers/56811.html

 

http://www.xilinx.com/support/answers/53599.html

 

http://www.xilinx.com/support/answers/57452.html

 

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

View solution in original post

0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
13,008 Views
Registered: ‎08-01-2012

Re: ZC706 - Power Management - set VADJ through TI Fusion permanent?

Jump to solution

Q1) Once I programmed the UCD90120A either way, do the settings stay after power off and on?

Yes

 

 

Q2) I read somewhere that you can get the USB-to-GPIO Cable from TI for free when you have an Eval Board. Is that still true?

Q3) If so, where can I get it for free? On the TI page there is only the 75$ product available.

 

The following Answer http://www.xilinx.com/support/answers/54022.html give details

 

You can specify evaluation board voucher number. I guess there is discount in price

 

Also the below AR's are having useful information:-

 

http://www.xilinx.com/support/answers/56811.html

 

http://www.xilinx.com/support/answers/53599.html

 

http://www.xilinx.com/support/answers/57452.html

 

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

View solution in original post

0 Kudos