UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Newbie ftauziac
Newbie
1,107 Views
Registered: ‎06-06-2018

ZCU102 - Board User Interface software

Hi,

I try to use the ZCU102 - Board User Interface (BoardUI.exe) to get currents on all power rails.

I follow xtp433 tutorial, I updated board firmware successfully with the 5th July 2017 version.

However in "Power" tab, I can't read any power/voltage or current. It works for the "voltages" tab and "system monitor" tab and others.

I get this error when I try to get the power on PSINTFP for example :

 

Running sysc func: <interpINA226:0>
Error while running sysc function
Traceback (most recent call last):
  File "testthread.py", line 537, in sysc
  File "config.py", line 563, in interpINA226
ZeroDivisionError: float division by zero

This is the same error for all powers for PS side and PL side in tab "Use Default Calibration".

Thank you for your answer,

Best regards

0 Kudos
12 Replies
Contributor
Contributor
999 Views
Registered: ‎05-07-2018

Re: ZCU102 - Board User Interface software

I have the same problem.  I am able to control clocks, read voltage, but unable to read power information and unable to read FMC HPC0 EEPROM Data.

0 Kudos
Moderator
Moderator
979 Views
Registered: ‎06-05-2013

Re: ZCU102 - Board User Interface software

Hi,
Which version of System controller you are using? Can you try with any other SCUI version.

Try with 2017.4 Here is the link to download it.
https://www.xilinx.com/member/forms/download/design-license.html?cid=f11af463-30d6-4325-88f1-d5ee220bb0de&filename=rdf0382-zcu102-system-controller-c-2017-4.zip

Thanks
Harshit
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Contributor
Contributor
608 Views
Registered: ‎06-20-2018

Re: ZCU102 - Board User Interface software

 I am seeing the same problem with Vivado 2018.3, try to read Power - Use Default Calibration - PS Side

Running sysc func: <interpINA226:0>
Error while running sysc function
Traceback (most recent call last):
File "testthread.py", line 537, in sysc
File "config.py", line 563, in interpINA226
ZeroDivisionError: float division by zero

0 Kudos
Xilinx Employee
Xilinx Employee
600 Views
Registered: ‎06-21-2018

Re: ZCU102 - Board User Interface software

Hi Chris,

That problem was fixed on the latest version of the BIT. 

On the folder \zcu102_bit\BoardUI\tests\ZCU102, there's a SC.yaml 

The first line has this comment:

# Version 1.1 08-14-18 Bradw Fix interpINA226 calls: need shunt resistor value. Passing 0 in most places got divide by 0 error.

Let me know if yours is different.

Thanks,
Andres

0 Kudos
Contributor
Contributor
589 Views
Registered: ‎06-20-2018

Re: ZCU102 - Board User Interface software

Hi Andres,

I downloaded rdf0382-zcu102-system-controller-c-2018-3.zip  from https://www.xilinx.com/products/boards-and-kits/ek-u1-zcu102-g.html#documentation. I assummed that is the latest. I found SC.yaml in a different path than what you have shown, I found it at  \rdf0382-zcu102-system-controller-c-2018-3\zcu102_scui\tests\ZCU102. Opened SC.yaml and I don't see the comment that you had mentioned.

Thanks

Chris

 

 

 

0 Kudos
Xilinx Employee
Xilinx Employee
578 Views
Registered: ‎06-21-2018

Re: ZCU102 - Board User Interface software

Hi Chris,

Try with rdf0377-zcu102-bit-c-2018-3.zip  from the same documentation page and run BoardUI.exe. That one should have the right .yaml file.

Thanks,
Andres

 

0 Kudos
Contributor
Contributor
571 Views
Registered: ‎06-20-2018

Re: ZCU102 - Board User Interface software

Hi Andres,

  Power Read worked fine with rdf0377-zcu102-bit-c-2018-3.zip but System Monitor is still having the same issue. See attached screen capture.

Thanks

Chris

 

sm.png
0 Kudos
Xilinx Employee
Xilinx Employee
566 Views
Registered: ‎06-21-2018

Re: ZCU102 - Board User Interface software

What is the issue?
Thanks,
Andres
0 Kudos
Contributor
Contributor
553 Views
Registered: ‎06-20-2018

Re: ZCU102 - Board User Interface software

Sorry, sent you the wrong file. See attached

 

Chris

sm.png
0 Kudos
Xilinx Employee
Xilinx Employee
476 Views
Registered: ‎06-21-2018

Re: ZCU102 - Board User Interface software

Hi Chris,

That fails for me, too. I'll ask around, but it might take a few days to get a fix.

Thanks,
Andres

Tags (1)
0 Kudos
253 Views
Registered: ‎09-05-2019

Re: ZCU102 - Board User Interface software

Hi Andres,

Did you finished to fix it?

Thanks.

Medhi

0 Kudos
Xilinx Employee
Xilinx Employee
231 Views
Registered: ‎07-11-2019

Re: ZCU102 - Board User Interface software

Hello khoja.medhi@gmail.com

I suggest trying it on Vivado 2019.1 because it has worked for me. 

I have attached a screenshot of my results working on my machine using Vivado 2019.1

solution_2019.PNG

---------------------------------------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
---------------------------------------------------------------------------------------------------------