UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor darren
Visitor
1,072 Views
Registered: ‎12-03-2018

zcu104, Ping failed, Could not find regular expression in step 4 of test 7

Jump to solution

hi, I am trying to BIT using zc106 board.(XTP498, ZCU104 Board Interface Test ver 3.0)

I also see a guide xtp504-zcu104-setup-c-2018-2.pdf.

when I run PING test, It was failed and I got a this error message.

Error: Could not find regular expression in step 4 of test 7 - "(.*)Pinging\s+192.168.1.10\s+with\s+32\s+bytes\s+of\s+data:"

You can see a all log in PING_Error.txt

I checked DIP SW(SW6), Network configuration, UART serial connection, but I don't know way.

I see a log that 4 of 5 ping command passed but 5th ping  script has problem.

How can I fix it??

plz let me know.

thank you. 

 

Tags (4)
0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
1,060 Views
Registered: ‎06-06-2018

Re: zcu104, Ping failed, Could not find regular expression in step 4 of test 7

Jump to solution

Hi @darren,

 

Please try using Vivado 2018.2 

Ensure that no other Terminal program is connected to the ZCU104’s COM ports while the Board Interface Test is running – See XTP504, for details on COM Ports

Only one board can be connected to your PC during the test – Disconnect any other board UARTs or Programming Cables

 If you missed any set-up instructions and experience problems, then please follow these steps: 1. Recheck your setup 2. End any hw_server processes and cycle board power 3. Open Vivado Hardware Manager and test PC-board JTAG connectivity

 

To perform PING Test below steps are required:

This PING  test requires optional equipment

EZ-11B or EZ-22B remote power switch, setup to IP address of 192.168.0.12

  • Setup details are available later in this Appendix (refer XTP498 v3.0)

If this is not available, the PING test will require manual power cycling

Regards,

Deepak D N

---------------------------------------------------------------------------------------------------

Reply or give kudo or accept as a solution.

---------------------------------------------------------------------------------------------------

Regards,
Deepak D N
---------------------------------------------------------------------------
Please Kudo and Accept as a Solution, If it helps.
---------------------------------------------------------------------------

View solution in original post

1 Reply
Xilinx Employee
Xilinx Employee
1,061 Views
Registered: ‎06-06-2018

Re: zcu104, Ping failed, Could not find regular expression in step 4 of test 7

Jump to solution

Hi @darren,

 

Please try using Vivado 2018.2 

Ensure that no other Terminal program is connected to the ZCU104’s COM ports while the Board Interface Test is running – See XTP504, for details on COM Ports

Only one board can be connected to your PC during the test – Disconnect any other board UARTs or Programming Cables

 If you missed any set-up instructions and experience problems, then please follow these steps: 1. Recheck your setup 2. End any hw_server processes and cycle board power 3. Open Vivado Hardware Manager and test PC-board JTAG connectivity

 

To perform PING Test below steps are required:

This PING  test requires optional equipment

EZ-11B or EZ-22B remote power switch, setup to IP address of 192.168.0.12

  • Setup details are available later in this Appendix (refer XTP498 v3.0)

If this is not available, the PING test will require manual power cycling

Regards,

Deepak D N

---------------------------------------------------------------------------------------------------

Reply or give kudo or accept as a solution.

---------------------------------------------------------------------------------------------------

Regards,
Deepak D N
---------------------------------------------------------------------------
Please Kudo and Accept as a Solution, If it helps.
---------------------------------------------------------------------------

View solution in original post