cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Participant
Participant
768 Views
Registered: ‎05-16-2012

FIFO Gen 13.2, bready never goes high

HI All,

 

I am trying to simulate AXI Async FIFO using  FIFO Gen 13.2 in Vivado 2018.1 and QuestaSim 10.7

 

The axi_m_bready signal, generated from the fifo, never goes high, even after reset. The same design worked fine in Vivado 2017.4.1. After upgrade of iPs the design fails on write response transaction because of bready never going high.

 

Simulation SetUp

Vivado 2018.1

QuestaSim 10.7

FIFO Generator 13.2

 

Kindly let me know if this is a know issues or any suggestions on debugging this further.

 

Thanks,

Anup.

0 Kudos
1 Reply
Highlighted
Community Manager
Community Manager
735 Views
Registered: ‎07-23-2012

Can you please share .xci file to reproduce and investigate this issue at my end?
-----------------------------------------------------------------------------------------------
Please mark the post as "Accept as solution" if the information provided answers your query/resolves your issue.

Give Kudos to a post which you think is helpful.
0 Kudos