cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Contributor
Contributor
372 Views
Registered: ‎03-04-2019

How to include floating point IP(adder,multiply....) in my VHDL code?

Jump to solution

No Block Design!

In Vivado 2109.1.2

How to include floating point IP in my VHDL code?

There is no in Zynq-7000 Libraries Guide and Language Template !

 

 

 

 

0 Kudos
Reply
1 Solution

Accepted Solutions
Moderator
Moderator
329 Views
Registered: ‎08-01-2007

In Vivado IP catalog, find the floating point IP, click "customize IP", configure the IP, click "ok" button to generate the IP, find the "*.vho" file in the generated IP folder, copy the content from the *.vho file to your design, which is to instantiate the IP in your design.

 

---------------------------------------------------------------------------------
Please Kudo or Accept as a solution, If this Post helped you.
---------------------------------------------------------------------------------

View solution in original post

0 Kudos
Reply
1 Reply
Moderator
Moderator
330 Views
Registered: ‎08-01-2007

In Vivado IP catalog, find the floating point IP, click "customize IP", configure the IP, click "ok" button to generate the IP, find the "*.vho" file in the generated IP folder, copy the content from the *.vho file to your design, which is to instantiate the IP in your design.

 

---------------------------------------------------------------------------------
Please Kudo or Accept as a solution, If this Post helped you.
---------------------------------------------------------------------------------

View solution in original post

0 Kudos
Reply